The image is a prototype. Some specifications may differ.
Direct distribution price: 10,200 yen (including shipping costs in Japan)
The PSM02 series is a high-performance noise suppressor and smoother capacitance than the PSM01, with the LPS01's developmental filter cut out and housed in the PSM V2 board.
BRi-PSM02-MF has 3 KAs reduced from PSM02-FF to a total of 10 to accommodate switching power supplies such as 12V switching AC adapters and USB PD 65W or higher devices + trigger cable.
Two electrolytic capacitors KA 25V 6,800uF, eight Nichicon solid polymer capacitors FPCAP RNL 25V 560uF, two WIMA film MKP2 0.1uF
Total electrolytic capacitor capacity 18,080uF
By using FPCAP RNL, the common performance of excessive responsiveness/information volume and sound separation of the PSM02 series is maintained, while a moderate volume feeling, especially in the high frequency range, does not sting the ear due to the amount of information, and the PSM02 series is a balanced type.
- 12V~24V switching AC adapter
- USB PD GaN 65W or higher device + USB trigger cable
- 5V~18V transformer AC adapter
- 5V~24V linear regulated power supply
Order distribution only
Confirmed to work with genuine switching AC adapter of FiiO K7 authorized import.
Noise reduction in the entire range and excessive response comparable to switching power supplies, while having sound resonance, fluctuation, reverberation, openness, and good volume in the entire range, without stabbing the ear.
Singatron 2DC-G213-D42
5.5 mm OD / 2.1 mm ID
DC jack manufactured by Singatron, Taiwan.
Metal body and robust settings for secure connection.
Murata EMIFIL BNX016-01
Combines conventional common/normal mode coil/capacitor in one,
Reduces noise by 40 dB over a wide bandwidth from 100 KHz to 1 GHz, which is unreachable with conventional products.
Nichicon UKA 25V/6,800uF x 2 (13,600uF)
Nichicon's current top-of-the-range audio grade capacitors.
105°C-compatible, high-grade product with carefully selected components for improved sound quality.
It reproduces the sound from the start of the sound to the afterglow with a straightforward sound from the bass range to the high frequencies including the high-resolution range.
The BRi-PSM02-Mx has three less UKAs than the PSM02-Fx to accommodate power supplies such as 12V/2A switching AC adaptors and USB PD 65W or higher devices + trigger cable, for a total of 13,600uF, and in combination with the WIMA MKP2, further noise reduction and power supply smoothing.
WIMA MKP2 0.1uF ⅹ２
Film capacitors made by WIMA of Germany, which are also used in professional audio equipment.
Together with Nichicon UKA, they are responsible for noise reduction in the audible to high-resolution range.
Due to its high performance, Nichicon UKA can oscillate, so the high sound quality is maintained by using WIMA film in combination.
In the PSM02 series, based on the experience with the LPS01, MKP2s are used, which are more compatible but more expensive, and by placing two of them - one on the UKA side and one on the polymer solid capacitor side - high sound quality on the UKA side is achieved and oscillation is suppressed, resulting in even clearer high frequencies and tighter bass frequencies than the PSM01 series. The PSM01 series has even clearer high frequencies and tighter low frequencies than the PSM01 series.
Nichicon FPCAP RNL 5K 25V 560uF x 8 (4,480uF)
Nichicon's ultra-low ESR solid polymer capacitors
The PSM02-xF series uses eight Nichicon FPCAP RNL solid polymer capacitors, which are more expensive, but are responsible for enhancing the over-responsiveness, noise reduction and volume of the PSM02 series.The method of connecting the capacitors is different from the PSM01-x2N series. This is responsible for the PSM02 series' improved responsiveness, information content, sound separation and noise reduction.
The Nichicon FPCAP RNL uses an ultra-low ESR 10 mΩ 5000-hour product (FP5K).
The PSM02 series is a balanced type that can be used all-round because of its moderate volume, high frequencies that do not stick in the ear and 25 V compatibility.