distribution price 9,000 JPY (including postage in Japan)
The BRi-PSM01-F2N (Full Spec 2N) is exclusively designed for linear transformer type AC adaptors and linear power supplies and has the largest smoothing capacity with up to seven capacitors on the PSM01 board.
Four Nichicon KA 25V 6800uF electrolytic capacitors and a WIMA film MKP2 0.1uF.
The limited edition M2N uses three Nichicon PLG solid polymer capacitors 16V 470uF, making it a high-performance version for the limited 16V withstand voltage.
Total electrolytic capacitor capacity 28,610uF
- 5V~12V transformer AC adaptor
- 5V~15V linear regulated power supply
Combined with the noise reduction in the whole range and the transformer AC adaptor, the sound has the same fast response as a switching power supply, but with the same resonance, fluctuation, reverberation and openness of the sound in the whole range.
In addition, the combination of Nichicon solid polymer capacitors, WIMA MKP2 and KA makes the high frequencies even clearer than the normal version.
The tight bass range is also more pronounced than in the standard version.
The LPS01 series linear power supply already incorporates the PSM01 developmental filter and does not require any additional connections to the LPS01.
Note: For those who really want to use a 12V switching AC adaptor with a device such as the FiiO K7 or K11, please contact us individually after preparing a 12V 2A or higher linear system (transformer) AC adaptor or linear system power supply unit such as the YAMAHA PA-6/B or its successor. Please consult us individually.
Singatron 2DC-G213-D42
5.5 mm OD / 2.1 mm ID
DC jack manufactured by Singatron, Taiwan.
Metal body and robust settings for secure connection.
Murata EMIFIL BNX016-01
Combines conventional common/normal mode coil/capacitor in one,
Reduces noise by40 dB over a wide bandwidth from 100KHz to 1GHz, which is unreachable with conventional products.
Nichicon PLG 16V 470uF x 3 (1,410uF)
Nichicon's ultra-low ESR solid polymer capacitors
The 2N series uses three Nichicon PLG solid polymer capacitors, which are more expensive but provide even better noise suppression than the standard version.
Nichicon PLGs are limited to 16 V because they are only released up to 16 V withstand voltage, but they provide powerful noise suppression with a low ESR performance of 11 mΩ.
WIMA MKP2 0.1uF ⅹ２
Film capacitors made by WIMA of Germany, which are also used in professional audio equipment.
Together with Nichicon UKA, they are responsible for noise reduction in the audible to high-resolution range.
Due to its high performance, Nichicon UKA can sometimes oscillate, so the high sound quality is maintained by using WIMA film in combination.
The limited edition 2x series uses two MKP2s, which are more compatible but more prone to oscillation and are more expensive, to suppress oscillation and achieve clearer high frequencies and tighter bass frequencies than the standard version.
Nichicon UKA 25V/6,800uF x 4 (27,200uF)
Nichicon's current top-of-the-range audio grade capacitors.
105°C-compatible, high-grade product with carefully selected components for improved sound quality.
It reproduces a straightforward sound from the bass range to the high frequencies, including the high-resolution range, without any lingering sound.
The BRi-PSM01-F2N achieves even better sound quality in combination with the MKP2 and uses a 6,800uF KA to compensate for the lower smoothing capacitance due to the addition of solid polymer capacitors.
Instead of limiting the transformer AC adaptor/linear power supply, an additional total of 27,200uF is additionally mounted for further noise reduction and power supply smoothing.